NAVFAC Design-Build Model Request for Proposal - Entry Control Facility
E10 EQUIPMENT
NAVFAC PTS-E10 (September 2022)
------------------------------
Preparing Activity: NAVFAC SUPERSEDING PTS-E10 (December 2018)
PERFORMANCE TECHNICAL SPECIFICATION
SECTION E10
EQUIPMENT
09/22
NOTE: This section is intended to be used as a guide and contains requirements that are common to many different types of facilities; however, not all requirements and equipment items will be applicable to all projects. In addition, there may be special requirements for a particular project that are not addressed at all. The RFP preparer may have to incorporate additional information to address these special requirements in this PTS and corresponding Part 3 ESR. If the RFP preparer chooses to delete building elements that are not required for the project, do not change the remaining Uniformat paragraph designations (example - A102001). Uniformat designations are unique to the products they are assigned to. However, the subparagraph numerical extensions (example – 1.2 or a,b,c) of the Uniformat designations may change if subparagraphs are deleted.
This guide specification is formatted utilizing Uniformat II, an industry recognized standard, ASTM E 1557. When the RFP preparer chooses to add a paragraph that does not apply to an existing building element already included in the specification, refer to the Uniformat/WBS located on the NAVFAC Design-Build Website for a listing of Uniformat II designations and definitions.
NOTE: The RFP preparer may view or hide the criteria notes in this PTS section by modifying the WORD preferences for "Hidden text". To view the criteria notes, choose "File" then "Option". Click "Display" then check the "Hidden text" box under "Always show these formatting marks on the screen". In the same section, check the box for "Print hidden text" under "Printing options" to print the criteria notes.
NOTE: The following Table of Contents is for navigation purposes within the document and is not intended to be part of the final edited documents.
TABLE OF CONTENTS
E10 GENERAL
E10 1.1 GENERAL REQUIREMENTS
E10 1.2 DESIGN GUIDANCE
E10 1.3 PERFORMANCE VERIFICATION AND COMPLIANCE TESTING
E10 1.4 DESIGN SUBMITTALS
E10 1.5 CONSTRUCTION SUBMITTALS
E1010 COMMERCIAL EQUIPMENT
E1040 GOVERNMENT FURNISHED EQUIPMENT
E1090 OTHER EQUIPMENT
E109090 OTHER SPECIALIZED FIXED AND MOVABLE EQUIPMENT
E109090 1.1 WEAPONS RACKS
E10 GENERAL
RFP Part 3 including the Engineering System Requirements (ESR) provide project specific requirements. The RFP Part 4, Performance Technical Sections (PTS) provide generalized technical requirements that apply to multiple facility types and include more requirements than are applicable to any one project. Therefore, only the RFP Part 4 requirements that apply to the project and further define the RFP Part 3 project specific requirements are required.
E10 1.1 GENERAL REQUIREMENTS
Where required by the project program, obtain the services of equipment specialists to specify any audiovisual or other specialty equipment. Equipment specialists must not have any affiliation with the product specified. All specialty equipment must be installed by qualified installers regularly engaged in installing the specialty equipment. Systems furnishings installers must be the systems furniture manufacturer's dealer of record.
E10 1.2 DESIGN GUIDANCE
Provide the design and installation in accordance with the following references. This Performance Technical Specification (PTS) adds clarification to the fundamental requirements contained in the following Government Standards. The general requirements of this PTS section are located in PTS Section Z10, General Performance Technical Specification.
Industry standards, codes, and Government standards that are referenced in the section text that are not found in the Unified Master Reference List (UMRL) in the Federal Facility Criteria (FFC) at the Whole Building Design Guide (WBDG) website, are listed below for basic designation identification. Comply with the required and advisory portions of the current edition of the standard at the time of contract award.
E10 1.2.1 Government Standards
UNIFIED FACILITIES CRITERIA (UFC)
| UFC 1-200-01 | DoD Building Code (General Building Requirements) (A reference in this PTS section to UFC 1-200-01 requires compliance with the Tri-Service Core UFCs that are listed therein, which includes the following significant UFC(s): UFC 3-101-01, Architecture UFC 3-120-10, Interior Design) |
| UFC 1-200-02 | High Performance and Sustainable Building Requirements |
E10 1.3 PERFORMANCE VERIFICATION AND COMPLIANCE TESTING
Provide verification of satisfactory special equipment and furnishing systems performance via Performance Verification Testing, as detailed in this section of the RFP.
E10 1.4 DESIGN SUBMITTALS
Provide design submittals in accordance with Part 2 Section 01 33 10.05 20, Design Submittal Procedures, Facilities Criteria (FC) 1-300-09N, Navy and Marine Corps Design Procedures, UFC 3-101-01, Architecture, and UFC 3-120-10, Interior Design.
NOTE: NAVFAC has made every effort to use commercial standards in the PTS sections. This PTS section is designed to only use commercial standards. If project requirements dictate the use of a UFGS sections as a standard, add a paragraph here listing the required UFGS section. State in the paragraph that the DOR must edit this UFGS section in accordance with PTS Z10 and submit it as a part of the design submittal.
E10 1.5 CONSTRUCTION SUBMITTALS
Submit construction submittals in accordance with PTS Section Z10, General Performance Technical Specifications. In addition to the Z10 requirements, the Designer of Record (DOR) must approve the following construction submittals as a minimum:
Field tests of equipment, vault door.
E1010 COMMERCIAL EQUIPMENT
E1040 GOVERNMENT FURNISHED EQUIPMENT
Refer to the project program.
E1090 OTHER EQUIPMENT
E109090 OTHER SPECIALIZED FIXED AND MOVABLE EQUIPMENT
Specialized fixed and moveable equipment not described by the other assembly categories.
E109090 1.1 WEAPONS RACKS
Weapons Storage Racks may be purchased or may be steel fabrications. Comply with OPNAVINST 5530.13c and standard operating procedure for the facility.
-- End of Section --